| General: |
| Model: | FW-7811 |
|---|
| Detailed: |
| System board: | NORCO-MB4KL |
|---|
| Indicator: | Power ON/OFF X 1, HDD X 1 |
|---|
| Front panel connector: | Four RJ45 LAN ports, two RJ45 serial ports (COM), two USB 2.0 ports |
|---|
| Switch: | Power ON/OFF X 1 |
|---|
| CPU: | 478pin Willamete or Northwood processor, Bus clock 400/533/800MHz |
|---|
| Chipset: | Intel865G + ICH5 |
|---|
| Super IO: | Winbond-W83627HF |
|---|
| DDR SDRAM: | Two 184pin DDR DIMM. dual-channel, Support 266MHz/333MHz/400MHz |
|---|
| VGA: | Intel integrated graphic controller, internal 10 pin VGA connector for product development testing |
|---|
| LAN: | Four gigabit LAN ports on rear panel, one by Intel82547EI chip via CSA, and three by Intel82540EM via PCI. (Optional Intel82551QM chip to provide three 10/100M network interfaces) |
|---|
| Serial ATA: | Two internal SATA ports for product development testing |
|---|
| Compact Flash: | One standard 50 pin Compact Flash socket |
|---|
| BIOS: | 4M Flash BIOS, APM 1.2, Supports boot from USB device or CD-ROM |
|---|
| Expansion Slots: | One PCI extension connector for product development testing |
|---|
| COM: | Two Fast UART 16550 serial ports. |
|---|
| IDE: | One standard EIDE connector , one MINI IDE connector for 2.5" IDE devices, support Ultra DMA 66/100 |
|---|
| USB: | Two USB 2.0 ports |
|---|
| KB & Mouse: | One Internal 6-pin Mini-Din connector for product development testing |
|---|
| Watchdog Timer: | Software enable/disable, Generates NMI or system reset with 1 to 255 sec. / min. of time out value |
|---|
| Power supply: | Standard 1U ATX P4 power supply |
|---|
| Dimensions: |
| Size: | 17" X 16.5" X 1.69" |
|---|