SanDisk X300S SD7UB3Q-256G-1122 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD)
Not In StockNew5 Year
SanDisk X300s SE-SSD
Ideal for corporate PCs and notebooks, the SanDisk X300s SE-SSD (SelfEncrypting Solid-State Drive) is built on industry-leading 1Ynm multi-level cell (MLC) NAND flash technology and incorporates hardware-based full disk encryption and advanced power management.
The X300s features support for the TCG Opal 2.0 and Microsoft Encrypted Hard Drive security standards and a SATA DEVSLP low-power mode that is compatible with Microsoft InstantGo. Users will appreciate greater productivity with more useable hours per battery charge2 while companies can seamlessly secure their data for their on-the-go employees.
The X300s uses a tiered caching structure to improve random write performance. Modern operating systems typically access the storage device using small 4KB access blocks. These small access blocks conflict with the physical block structure (>1MB) of newer flash memory technology. To bridge this difference, the X300s employs three storage layers: Volatile cache - DDR DRAM cache, nCache - A non-volatile flash write cache, Mass storage – MLC NAND flash.
The nCache write cache is used to accumulate small writes at high speed then flush and consolidate them into the larger MLC section of the NAND flash memory array.
The X300s SE-SSD seamlessly encrypts the drive data on the fly using hardware-based 256-bit AES encryption. It supports the following industry-standard security specifications: ATA Security Feature Set, TCG Opal 2.0, Microsoft Encrypted Hard Drive (TCG OPAL 2.0 + IEEE 1667)
A performance throttling technique is used as a safety measure to protect the integrity of the data and prevent excessive heat dissipation. The X300s employs an on-board thermal sensor to monitor the SSD's critical component temperature. If it exceeds the normal range, drive performance is reduced until the temperature decreases to an acceptable level, at which time full performance is restored.
General Brand SanDisk Series X300S Model SD7UB3Q-256G-1122 Highlights SanDisk X300S SD7UB3Q-256G-1122 Internal Solid State Drive (SSD), 7mm 2.5" Form Factor, 256GB Capacity, SATA III (6Gb/s) Interface, Up to 2,000,000 hours MTBF. Specifications Form Factor 7mm 2.5-inch Cased Capacity 256GB Interface SATA III (6 Gb/s) backward compatible to SATA II (3 Gb/s) and SATA I (1.5 Gb/s) Size & Weight 7.0mm x 69.85mm x 100.5mm Performance [4KB QD32] Seq. Read up to 520 MB/s Seq. Write up to 460 MB/s Rand Read up to 90,000 IOPS Rand Write up to 80,000 IOPS Endurance (TBW) >80 Latency Read 55μs Latency Write 65μs Power Active Power 120 mW Max Read Operating 3,000 mW Max Write Operating 4,900 mW Slumber 90 mW DEVSLP 5.0 mW MTTF Up to 2,000,000 hours New Parameter 55±3g Environmental Operating Temperatures 0°C to 70°C Non-operating Temperatures -55°C to 85°C Operating Vibration 5.0 gRMS, 10 - 2000 Hz Non-operating Vibration 4.9 gRMS, 7 - 800 Hz Shock 1,500 G @0.5 msec half sine Certifications FCC, UL, TUV, KC, BSMI, VCCI Warranty 5 Years