SanDisk X300 SD7SF6S-512G-1122 mSATA 512GB SATA III MLC Internal Solid State Drive (SSD)
Not In StockNew3 Year
SanDisk X300 SSD
Based on state of the art 1Ynm X3 flash technology, the SanDisk X300 SSD SATA SAS PCIe delivers performance with high reliability and low power. It features nCache 2.0, SanDisk's next generation tiered caching technology, designed to improve SSD responsiveness for most corporate and consumer workloads.
The X300 is highly versatile and can accommodate a wide range of computing platforms. It is available in 2.5" 7mm cased, M.2 2280, and mSATA form factors with capacities of 128GB, 256GB, 512GB, and 1TB*.
nCache 2.0 Technology
nCache 2.0 uses a combination of SLC and X3/TLC flash blocks to improve endurance, increase efficiency, and boost performance. By first writing all of the data to SLC blocks, the write amplification on the X3 blocks is minimized.
The X300 SSD also includes a new and robust on-the-fly error handling mechanism called DataGuard Client. It uses page-level striping with distributed parity for an added layer of data protection and can recover errors that other traditional error correction mechanisms cannot.
The X300 utilizes a SATA DEVSLP low-power mode to minimize its power consumption during idle periods. DEVSLP enables the SSD to completely shut off its SATA PHY, thus resulting in much lower power consumption compared to SATA Slumber. This increases the amount of usable hours per battery charge, which is essential for modern mobile devices.
SanDisk SSDs can improve total cost of ownership (TCO) by reducing downtime due to hard drive failures. They also offer lower latency and greater read/write speeds over traditional HDDs6. IT departments can extend the useful life of their PC inventory by upgrading the HDDs to the X300 SSD, thus prolonging replacement cycles and maximizing asset value.
General Brand SanDisk Series X300 Model SD7SF6S-512G-1122 Highlights SanDisk X300 SD7SF6S-512G-1122 Internal Solid State Drive (SSD), mSATA Form Factor, 512GB Capacity, SATA III (6Gb/s) Interface, Up to 1,752,000 hours MTBF. Specifications Form Factor mSATA Capacity 512GB Interface SATA III (6 Gb/s) backward compatible to SATA II (3 Gb/s) and SATA I (1.5 Gb/s) Size & Weight 3.82mm x 29.85mm x 50.8mm @ 7.5 ± 0.5g Performance [4KB QD32] Seq. Read up to 525 MB/s Seq. Write up to 470 MB/s Rand Read up to 96,000 IOPS Rand Write up to 68,000 IOPS Endurance 80 TBW Power Average Power 95 mW Max Read Operating 2,500 mW Max Write Operating 3,900 mW Slumber 70 mW DEVSLP <7 mW MTBF Up to 1,752,000 hours Environmental Operating Temperatures 0°C to 70°C Non-operating Temperatures -55°C to 85°C Operating Vibration 5.0 gRMS, 10 - 2000 Hz Non-operating Vibration 4.9 gRMS, 7 - 800 Hz Shock 1,500 G @0.5 msec half sine Certifications FCC, UL, TUV, KC, BSMI, VCCI Warranty 3 Years