SanDisk X300S SD7SB3Q-064G-1122 2.5" 64GB SATA III Internal Solid State Drive (SSD)

  SanDisk X300S SD7SB3Q-064G-1122 2.5" 64GB SATA III Internal Solid State Drive (SSD)
Image 1
  • $70.00
  • $7.39

Found a Better Price?

OR
4.5 out of 5, based on 2 votes

SD7SB3Q-064G-1122619659116675CH634218

Not In StockNew5 Year

SanDisk X300S SD7SB3Q-064G-1122 Internal Solid State Drive (SSD), 7mm 2.5" Form Factor, 64GB Capacity, SATA III (6Gb/s) Interface, Up to 2,000,000 hours MTBF.
Description

 

SanDisk X300s SE-SSD

Ideal for corporate PCs and notebooks, the SanDisk X300s SE-SSD (SelfEncrypting Solid-State Drive) is built on industry-leading 1Ynm multi-level cell (MLC) NAND flash technology and incorporates hardware-based full disk encryption and advanced power management.

 

The X300s features support for the TCG Opal 2.0 and Microsoft Encrypted Hard Drive security standards and a SATA DEVSLP low-power mode that is compatible with Microsoft InstantGo. Users will appreciate greater productivity with more useable hours per battery charge2 while companies can seamlessly secure their data for their on-the-go employees.

 

 

Performance

The X300s uses a tiered caching structure to improve random write performance. Modern operating systems typically access the storage device using small 4KB access blocks. These small access blocks conflict with the physical block structure (>1MB) of newer flash memory technology. To bridge this difference, the X300s employs three storage layers: Volatile cache - DDR DRAM cache, nCache - A non-volatile flash write cache, Mass storage – MLC NAND flash.


The nCache write cache is used to accumulate small writes at high speed then flush and consolidate them into the larger MLC section of the NAND flash memory array.

 

Security

The X300s SE-SSD seamlessly encrypts the drive data on the fly using hardware-based 256-bit AES encryption. It supports the following industry-standard security specifications: ATA Security Feature Set, TCG Opal 2.0, Microsoft Encrypted Hard Drive (TCG OPAL 2.0 + IEEE 1667)

 

Thermal Throttling

A performance throttling technique is used as a safety measure to protect the integrity of the data and prevent excessive heat dissipation. The X300s employs an on-board thermal sensor to monitor the SSD's critical component temperature. If it exceeds the normal range, drive performance is reduced until the temperature decreases to an acceptable level, at which time full performance is restored.

 

Specification
General
BrandSanDisk
SeriesX300S
ModelSD7SB3Q-064G-1122
HighlightsSanDisk X300S SD7SB3Q-064G-1122 Internal Solid State Drive (SSD), 7mm 2.5" Form Factor, 64GB Capacity, SATA III (6Gb/s) Interface, Up to 2,000,000 hours MTBF.
Specifications
Form Factor7mm 2.5-inch Cased
Capacity64GB
InterfaceSATA III (6 Gb/s) backward compatible to SATA II (3 Gb/s) and SATA I (1.5 Gb/s)
Size & Weight7.0mm x 69.85mm x 100.5mm
Performance [4KB QD32]
Seq. Read up to510 MB/s
Seq. Write up to140 MB/s
Rand Read up to71,000 IOPS
Rand Write up to37,000 IOPS
Endurance (TBW)>40
Latency Read55μs
Latency Write65μs
Power
Active Power120 mW
Max Read Operating2,900 mW
Max Write Operating2,600 mW
Slumber90 mW
DEVSLP5.0 mW
MTTFUp to 2,000,000 hours
New Parameter51±3g
Environmental
Operating Temperatures0°C to 70°C
Non-operating Temperatures-55°C to 85°C
Operating Vibration5.0 gRMS, 10 - 2000 Hz
Non-operating Vibration4.9 gRMS, 7 - 800 Hz
Shock1,500 G @0.5 msec half sine
CertificationsFCC, UL, TUV, KC, BSMI, VCCI
Warranty5 Years
Thank your for your request. We will get back to you as soon as possible.