SanDisk X300 SD7SB6S-256G-1122 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD)

  SanDisk X300 SD7SB6S-256G-1122 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD)
Image 1
  • $90.00
  • $7.39

Found a Better Price?

OR
5 out of 5, based on 1 votes

SD7SB6S-256G-1122619659121587AS633098

21 In StockNew3 Year

SanDisk X300 SD7SB6S-256G-1122 Internal Solid State Drive (SSD), 7mm 2.5" Form Factor, 256GB Capacity, SATA III (6Gb/s) Interface, Up to 1,752,000 hours MTBF.
Description

 

SanDisk X300 SSD

Based on state of the art 1Ynm X3 flash technology, the SanDisk X300 SSD SATA SAS PCIe delivers performance with high reliability and low power. It features nCache 2.0, SanDisk's next generation tiered caching technology, designed to improve SSD responsiveness for most corporate and consumer workloads.


The X300 is highly versatile and can accommodate a wide range of computing platforms. It is available in 2.5" 7mm cased, M.2 2280, and mSATA form factors with capacities of 128GB, 256GB, 512GB, and 1TB*.

 

 

nCache 2.0 Technology

nCache 2.0 uses a combination of SLC and X3/TLC flash blocks to improve endurance, increase efficiency, and boost performance. By first writing all of the data to SLC blocks, the write amplification on the X3 blocks is minimized.

 

DataGuard Client

The X300 SSD also includes a new and robust on-the-fly error handling mechanism called DataGuard Client. It uses page-level striping with distributed parity for an added layer of data protection and can recover errors that other traditional error correction mechanisms cannot.

 

Low Power

The X300 utilizes a SATA DEVSLP low-power mode to minimize its power consumption during idle periods. DEVSLP enables the SSD to completely shut off its SATA PHY, thus resulting in much lower power consumption compared to SATA Slumber. This increases the amount of usable hours per battery charge, which is essential for modern mobile devices.

 

TCO

SanDisk SSDs can improve total cost of ownership (TCO) by reducing downtime due to hard drive failures. They also offer lower latency and greater read/write speeds over traditional HDDs6. IT departments can extend the useful life of their PC inventory by upgrading the HDDs to the X300 SSD, thus prolonging replacement cycles and maximizing asset value.

 

Specification
General
BrandSanDisk
SeriesX300
ModelSD7SB6S-256G-1122
HighlightsSanDisk X300 SD7SB6S-256G-1122 Internal Solid State Drive (SSD), 7mm 2.5" Form Factor, 256GB Capacity, SATA III (6Gb/s) Interface, Up to 1,752,000 hours MTBF.
Specifications
Form Factor7mm 2.5-inch
Capacity256GB
InterfaceSATA III (6 Gb/s) backward compatible to SATA II (3 Gb/s) and SATA I (1.5 Gb/s)
Size & Weight7.00mm x 69.85mm x 100.5mm @ 58 ± 3g
Performance [4KB QD32]
Seq. Read up to520 MB/s
Seq. Write up to470 MB/s
Rand Read up to91,000 IOPS
Rand Write up to57,000 IOPS
Endurance80 TBW
Power
Average Power95 mW
Max Read Operating2,450 mW
Max Write Operating3,900 mW
Slumber70 mW
DEVSLP<7 mW
MTBFUp to 1,752,000 hours
Environmental
Operating Temperatures0°C to 70°C
Non-operating Temperatures-55°C to 85°C
Operating Vibration5.0 gRMS, 10 - 2000 Hz
Non-operating Vibration4.9 gRMS, 7 - 800 Hz
Shock1,500 G @0.5 msec half sine
CertificationsFCC, UL, TUV, KC, BSMI, VCCI
Warranty3 Years
Warehouse
Thank your for your request. We will get back to you as soon as possible.